Superglue 20G Clear

PART NO. HRM0107

Everbuild superglue is a medium viscosity formula that can fill gaps to 0.1mm. For use on perfect fit surfaces where fast set is required. Bonds non porous surfaces eg most plastics, metals, glass, PVCu, rubber and EPDM. Viscosity at 25°c - 100cps. Set time 5 to 15 seconds. 

Size: 20g Bottle

Read more

£5.84
ex VAT
Tick In Stock
Delivery Order before 4:00pm for next day delivery

Everbuild superglue is a medium viscosity formula that can fill gaps to 0.1mm. For use on perfect fit surfaces where fast set is required. Bonds non porous surfaces eg most plastics, metals, glass, PVCu, rubber and EPDM. Viscosity at 25°c - 100cps. Set time 5 to 15 seconds. 

Size: 20g Bottle

    Application

    • The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants
    • Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times
    • Where possible, ensure working environment has a relative humidity of 50% +
    • Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds or as indicated below
    • Cure speed is rapid so exercise care when aligning

    Benefits

    • Flash setting formulation, bonds to most non porous surfaces in seconds
    • Fills gaps up to 0.1mm
    • Single component adhesive
    • 100% solvent free
    • Economical in use

     Limitations

    • Ensure surfaces are degreased prior to bonding
    • Ensure surfaces are close fitting. This adhesive will not bridge gaps
    • Do not use in applications involving constant water immersion
    • Do not use on bitumen or tar leaching products
    • As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt

    Customers Also Bought